Just sent you an email.

sold yo!

Borbet KBA 44682 15"x 7", offset 35mm, 4x100 bolt pattern.
Center caps and 57.1mm centering rings included.
Bought them new in 2005.
Wheels are in good condition and straight, one has curb rash that I repainted (wheel #4)
Finish and wear and tear is appropriate for 15 year old wheels, see pics ...

Alive and kicking!

034 tubular header with wastegate! For 7A, AAN, 3B
T3 output flange.
Includes stock wastegate and spring, header has cracked on the bottom and was rewelded.
Asking $349.00
Shipping extra, pm for shipping quote.

B3 80/90 aux radiator, Asking $149.00
Good condition, not clogged with rust or corrosion. Radiator had a ding in the lower right corner (see pics), it does not leak.
Shipping extra, pm for shipping quote (no, I won't throw shipping in for free).

IMG_0481.jpg

IMG_0482.jpg

IMG_0484.jpg

IMG ...

Updated, still have the 500lb springs!

.

Still for sale!!!!

I'm running the 1.8T sensor, it sticks up pretty high!

Did you have to modify the bolt hole that holds the temp sensor in or do you use the factory hole?

Thanks!

Yes, I had to drill out the manifold, then used gasket sealer to make sure there wasn't a vacuum leak, I think the connector is ...

I'm running the 1.8T sensor, it sticks up pretty high!

https://lh3.googleusercontent.com/hAc4nQuJLDLKQN7Goiza39JJ2NvBkkzgGY2oT7M7cOv_y6Zys3yqkUx17_3NRQ-NI1601Q3wKKy907hqIBzpatPX2p_mjwLFHrA0tjTDfNq_FKMBcNqJR1FkFlpar4v4rYT6NuGMjtpsjLY3KnFIV1LWFT22ycl3eVWYJgzGQbPE0N_UHfuf4erwhNVyQd ...

I just updated my engine code and cam specs sheet:

https://lh3.googleusercontent.com/ipi6pin6G_VF9DyZMOnM1cwOAnKEm9asELuXTqG3FB6p9hNctj6IPvD-a3CNCdjq1oROWitEUH2zj-DPx89WPTU5esEkKT0iSHYAUkayzl0DVwl4x7wFM7Sos95CBEEux3jakK3gkZjMbQv3BIMDTH5VMyZE-yECh2c1B9_ooivW-WbMfCUNnpj2FVTX8eDBTUKK9-KR5P4S ...

MikeB25 wrote:No experience with Cat cams but I found the 7A specs here:
http://brydon-eng.com/catalog/products/ ... ine-5-20v/

These seem to be pretty close to specs I found elsewhere.

Thanks! that helps.

Considering running aftermarket CAT cams in my 7A (this is in a track only car- '84 4kq): I've just rebuilt it, ARP rod bolts, head studs, coated bearings, Supertech springs, aluminum flywheel, cleaned up the ports/ported, matched the intake manifold (it's from the turbo "3B" engine) to the ports ...

Thanks! now if it would only stop raining.................

The stats:
7A
New rings, bearings, hone, valve job done on head.
Running Castrol GTX20/50
How should I run in the engine?

30min initial start up fast idle?
How hard to I drive it?
This is a track car, so i can't drive it on the street too much, I can do some quick runs up and down the local freeway ...

For sale: Summit coilover springs, mounted but no miles.
2.5" dia, 7" long, One pair 500lbs.
$75 + shipping. PM for more info!


https://lh3.googleusercontent.com/SV0N1w8Kpt0k_9BN2WCVzFJgFDX6X3BhvVFQ9ueMbLWaokWNtfgQCXbRY37sV_E2Qe-OAVlanPfmWpxOUeEvu_Gq5zNf8eB14hV4IIYL ...

Fragola Performance Systems Real Street Reusable PTFE Hose Ends

Bought new, never used, paid $150, asking $100 for the whole lot.
What you get:

Four- Hose End, Real Street, 90 Degree, -8 AN, Aluminum, Black Anodized

one- Hose End, Real Street, Straight, -8 AN, Aluminum, Black Anodized

one- Hose ...

Custom fab, made very well, asking $100 + shipping!
PM or email: type85 at gmail dot com
Made to fit Odyssey Drycell Battery model PC925L
Length (in): 6.640 in.
Width (in): 7.050 in.
Height (in): 5.040 in.

https://lh3.googleusercontent.com/sqtyiDZUs4kG6gsXEZSnabMh17OZUw44wfH_vPIRrxj1y2K ...

Only way to know for sure is a used oil analysis.

Blackstone would be pretty handy for you as it's domestic, I lucked into a local place that was cheaper to begin with and turned into nearly half price with the employer discount.

https://www.blackstone-labs.com/free-test-kits.php

You know... I ...

carl wrote:Heated crank and rod bearings will get that tint too sometimes. Good oil pressure?

Yes, 70+psi cold, 50psi hot.
I see about 265° max oil temps on track, I have a 19 row Earls oil cooler, along with the AAN windage tray and a 7A aluminum oil pan.

Looks like bronze, kind of a gold color, this is from dumping the contents of the filter into the drain pan, oil changed once a year at about 2,500 miles max, 75% of the mileage is on track,
2.6L 20v no turbo
substantial mods, EFI, E85
Never revved above 6,000
Valvoline VR1 20/50

2nd. pic is the ...

Images not loading, but...

Never, ever, EVER store E85 in an unsealed container like that. If you're going to lay up an E85-running car for more than a month or so, pump it all out and refill the tank with gasoline and run it a bit to flush the lines/injectors out. That way it won't absorb ...

Braided lines are about 2 years old, don't remember brand, but probably Summit generic braided lines...
Car sat the whole time with E85 in the tank, started about every month to keep the battery charged.

https://goo.gl/photos/HxLz7ksXMY1hNYjz5

Yeah, summit racing nitrile hoses are not ...

Braided lines are about 2 years old, don't remember brand, but probably Summit generic braided lines...
Car sat the whole time with E85 in the tank, started about every month to keep the battery charged.

https://goo.gl/photos/HxLz7ksXMY1hNYjz5