Page 1 of 1

S2 harness grounds

PostPosted: Mon May 18, 2020 3:59 pm
by rennenmsports
At the JPT 55 pin connector I have grounds at pins 10, 14, 19 and 24 which say 0v on the pin out. Pins 30 and 48 say 0v ref which are not grounded. Are pins 30 and 48 supposed to be grounded all the time? Please help. I may have a bad harness but I’m not sure. The VEMS pnp Instructions I got says to check all grounds including pin 30 but not 48 too. I find it odd that it mentions 30 and not 48 and it’s only at the ones marked ref. I’m not sure if it’s coincidence or not
DB59EF5A-76D1-4D90-BBF5-F76052E8CDC2.png
DB59EF5A-76D1-4D90-BBF5-F76052E8CDC2.png (387.77 KiB) Viewed 1913 times

66D028E9-5600-4DDD-917C-1C72DC2AF62D.jpeg
66D028E9-5600-4DDD-917C-1C72DC2AF62D.jpeg (92.05 KiB) Viewed 1913 times