Jim Green's 90q 20vt - 636whp 07k
-
jakethrake
Re: Jim Green's 90q 20vt - The quest for 275's
No rest for the wicked, eh, Jim? I was going to ask if you wanted to come up to Florians later to see Chris, but it looks like you have a full plate.
-
varia
Re: Jim Green's 90q 20vt - The quest for 275's
jakethrake wrote:No rest for the wicked, eh, Jim? I was going to ask if you wanted to come up to Florians later to see Chris, but it looks like you have a full plate.
That would be great!
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
I would normally, but I have a lot of festivities planned for the next week and unfortunately playing with cars is not one of them.
Re: Jim Green's 90q 20vt - The quest for 275's
This snail's pace is pissing me off.
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
:thanks: :cheers: I got to enjoy the nanner tonight going to get a radiator fan for the ocho. This car is soo much fun
Looks like the fan fried the control module as well so I guess the Camry is on point since summer has arrived and it's freaken hot!
Looks like the fan fried the control module as well so I guess the Camry is on point since summer has arrived and it's freaken hot!
Re: Jim Green's 90q 20vt - The quest for 275's
audifreakjim wrote:Word.

-Ben-

-1985 Audi 4kq: Xona 7164 AAN 488whp- -2009 Audi A4 -

-1985 Audi 4kq: Xona 7164 AAN 488whp- -2009 Audi A4 -
-
jakethrake
Re: Jim Green's 90q 20vt - The quest for 275's
Hey Jim, looks like Greg, Chris and me are making a "yard swoop" in the morning. In need of anything specific?
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
Thanks for the offer, but I think I have everything I need at the moment!
Re: Jim Green's 90q 20vt - The quest for 275's
are these 9 or 9.5" wide? whats the offset?
also how close is a 90q rocker length vs cq?
also how close is a 90q rocker length vs cq?
24v-VR6T-CQ BEAST http://www.theprojectpad.com/viewtopic.php?f=11&t=193#p37887
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
9.5" to fit the 275 tyrs. The CQ is shorter in the rockers, so you would have to shorten them which is much easier than stretching them. Also look into the avant side skirts, I think they are shorter
Re: Jim Green's 90q 20vt - The quest for 275's
what are you runnign for offset?
24v-VR6T-CQ BEAST http://www.theprojectpad.com/viewtopic.php?f=11&t=193#p37887
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
Et 38 with a 1.5mm spacer up front and a 4mm spacer in the rear
Re: Jim Green's 90q 20vt - The quest for 275's
audifreakjim wrote:Et 38 with a 1.5mm spacer up front and a 4mm spacer in the rear
what kind of clearance do you have with the HT uprihgts?
24v-VR6T-CQ BEAST http://www.theprojectpad.com/viewtopic.php?f=11&t=193#p37887
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
I just got everything together last night. I built everything with about 1/8" clearance. I could get another 1/16"-1/8" with a bit of grinding if necessary. It is all up to you on how much clearance you dial in but the more clearance, the less ackerman. I gave up on trying to save ackerman and rotated them enough to provide the clearance required.
Re: Jim Green's 90q 20vt - The quest for 275's
thanks, got any more pics?
24v-VR6T-CQ BEAST http://www.theprojectpad.com/viewtopic.php?f=11&t=193#p37887
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
16v-ABA-T VEMS O1E ETC 4Kq http://www.theprojectpad.com/viewtopic.php?f=11&t=201#p38264
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
There are a few updates coming tomorrow, side skirts have taken up a lot of time, but the brackets are on and now I just have to fine tune them.
The A6 has taken up my last three free weekends with emissions/catalytic converters, thermostat and brake issues. It's all sorted so back to the 90. BBQ or bust, the car may not be all yellow, but it will have the fenders on by then!
The A6 has taken up my last three free weekends with emissions/catalytic converters, thermostat and brake issues. It's all sorted so back to the 90. BBQ or bust, the car may not be all yellow, but it will have the fenders on by then!
Re: Jim Green's 90q 20vt - The quest for 275's
audifreakjim wrote: BBQ or bust, the car may not be all yellow, but it will have the fenders on by then!
Just as a reminder....Hank modified his fenders and the car showed up painted all red. :wink:
Darin
1989 80 20vt
1989 80 20vt
Re: Jim Green's 90q 20vt - The quest for 275's
But we would be ok with all yellow. The ole car just wouldn't seem like Jim's if it wasn't yellow.
Re: Jim Green's 90q 20vt - The quest for 275's
quattro87 wrote:But we would be ok with all yellow. The ole car just wouldn't seem like Jim's if it wasn't yellow.
I just meant there was no excuse for not having it painted.

Darin
1989 80 20vt
1989 80 20vt
Re: Jim Green's 90q 20vt - The quest for 275's
I knew thats what you meant, but we won't need a complete color change like Hank did.....yellow will do!! Get on it Jim!!
- audifreakjim
- Posts: 2142
- Joined: Sun Mar 03, 2013 3:00 pm
Re: Jim Green's 90q 20vt - The quest for 275's
OK, I will get more pics of the steering setup when the front end comes off again.
Here are the side skirt brackets. The underside of the car is so dented and tweaked the the best solution in my mind to just glue them on
If they ever come off, I will add some rivets, but this glue is not going anywhere!


Final resting spot, not I can build the fenders to mate up.

The aftermath

Now onto the rear control arms! The arm on the right is as they come from 034. The arm on the left has been spaced as far back as possible with spacers and rod end adjustment, and I added rubber boots to the rod ends. This is to re-center the wheel in the larger arch.

Random event of the day, WTF??

Ended the day here. Made blanks to cover the factory bumper mounting holes. Now I just have to mate these two together and the rear S2 bumper mounts will be taken care of.

Here are the side skirt brackets. The underside of the car is so dented and tweaked the the best solution in my mind to just glue them on
If they ever come off, I will add some rivets, but this glue is not going anywhere!Final resting spot, not I can build the fenders to mate up.
The aftermath
Now onto the rear control arms! The arm on the right is as they come from 034. The arm on the left has been spaced as far back as possible with spacers and rod end adjustment, and I added rubber boots to the rod ends. This is to re-center the wheel in the larger arch.
Random event of the day, WTF??
Ended the day here. Made blanks to cover the factory bumper mounting holes. Now I just have to mate these two together and the rear S2 bumper mounts will be taken care of.
Re: Jim Green's 90q 20vt - The quest for 275's
Those control arms are sexy!
-Ben-

-1985 Audi 4kq: Xona 7164 AAN 488whp- -2009 Audi A4 -

-1985 Audi 4kq: Xona 7164 AAN 488whp- -2009 Audi A4 -
-
WOMBAT
Re: Jim Green's 90q 20vt - The quest for 275's
Toyota prerunner, spider man, and a bunny. Yea, that's gotta be the most random thing I've seen in a while
Car looks great as always - this is gonna look perfect
Car looks great as always - this is gonna look perfect-
HT Motorsport
- Posts: 350
- Joined: Wed Feb 27, 2013 11:56 am
Re: Jim Green's 90q 20vt - The quest for 275's
WOMBAT wrote:Toyota prerunner, spider man, and a bunny. Yea, that's gotta be the most random thing I've seen in a whileCar looks great as always - this is gonna look perfect
:stupid: :woowoo:
