Easy way to swap rear diff bushing without press?

Document and share your build!
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Kuma »

Yeah, I was thinking oh man, badgeless is gonna look the shit! But I'm on the fence,lol.
jbrentd

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by jbrentd »

I'd say with rings. And mine had pearl rings when I bought it. One of the first things I changed.
mrmotorhead13

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by mrmotorhead13 »

I was thinking about finding a similar grille for my 90Q when I put on the B4 front, but putting the rings for the rear of the car on the front. They're a bit smaller/less obtrusive, just not sure how well they'd interface with the safety catch pull.
User avatar
Grillage
Posts: 863
Joined: Thu Feb 28, 2013 7:53 pm
Location: Cincinnati, OH

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Grillage »

Congrats on the new ride!

This stuff fixed my transmission grind...
http://www.vividracing.com/catalog/motu ... 46226.html
CURRENT
1995 90 Quattro 20VT - 1987 Porsche 924S - 1979 Porsche 928

PAST
1993 Audi 90 CS Quattro - 1990 CQ - V8 - 1986 Audi Coupe GT - 1995.5 Audi S6 - 1994 Cabriolet - 1993 Audi V8 - 2013 A5 - 2011 A4 Avant - 1986 Maserati Biturbo Spyder
User avatar
loxxrider
Posts: 6642
Joined: Wed Feb 27, 2013 7:46 am
Location: Jupiter, FL / Somewhere, PA

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by loxxrider »

I think rings will set it off for sure. White isn't a bad idea.
-Chris

'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Kuma »

im gonna roll the badgeless grill for a week or so and then ill get around to putting the other one. I need a drivers side panel for the under dash in grey.
audiPete

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by audiPete »

Kuma, if you want to roll a more euro like bumper without the expense of on buying and importing one, this is what my friend Mike did on his CQ...

Fiberglassed over the headlight washers, removed the rebar, and bumper shocks and mounted the bumper close to the body.

.. this of course will likely give you no more protection than one of the replica S2/RS2 bumpers, but only will cost you the time to fab it up.

Attachment ( 32112 ) : cq_bumper_no_rebar_drvr.jpg


Attachment ( 32113 ) : cq_bumper_no_rebar_frnt.jpg


Attachment ( 32114 ) : cq_bumper_no_rebar_frnt2.jpg


Attachment ( 32115 ) : cq_bumper_no_rebar_pasgr.jpg
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Kuma »

That's good stuff to know. I may try that later on.


The car is kinda sputtering when I first start it up, I think I need to put another bottle of fuel injector cleaner.
User avatar
Wheeljack
Posts: 314
Joined: Wed Feb 27, 2013 10:47 pm
Location: Ute Territory
Contact:

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Wheeljack »

I would put some rings on the grill to see how it looks also. It would probably look similar to an OEM grill, with a blacked out surround.

And, I had that grill on my car for a short period, and it reminded me of the front end of a Nissan Sentra from the same era. Just needed a Nissan badge.
The Projects: eS2 Coupe /// ur quattro /// urS4 /// Diesel Vanagon
Image
http://brydon-eng.com
jbrentd

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by jbrentd »

In case he has something you need, there's an alpine white CQ being parted on QW.

http://forums.quattroworld.com/9080/msgs/35569.phtml
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Kuma »

hes got nothing i need.

I need the under dash for my drivers side. Mine is DONE.


other than that, the car is GREAT!



will be in search of newer tails. There is a block of mold in the bottom right corner.
Dr.Strangelove

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Dr.Strangelove »

I just found a bunch of "sport" B3 grills on Ebay. I find they look better than the ones that come stock on the CQs (at least in NA) because there are fewer vertical slats.

http://www.ebay.co.uk/itm/Audi-80-B3-Ty ... 20c98675c0" onclick="window.open(this.href);return false;

...that is if you are considering going back to b3.
secretagentman

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by secretagentman »

i have cheap ass expanded metal for my grill. actually does not look too bad. i need to make an exterior trim housing for it.

Image

Image
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Kuma »

Image
Image
old ^
Image
New^



I installed the new seat today and the reclining feature doesnt work and i have a spare plug left over and have no idea what i do with it.


I am kinda irritated cause i spent half an hour working through the rusty parts on the old seat to get it to even come up and now the new seat doesnt recline!


where does this plug go?! help!

Image



CALL OR TEXT ME TO HELP!!! i need to be able to drive the car to work soon!


678 3570676
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-B4 hood swapped! Looks funny

Post by Kuma »

secretagentman wrote:i have cheap ass expanded metal for my grill. actually does not look too bad. i need to make an exterior trim housing for it.

Image

Image




That looks cool! Interesting how it kinda sets off the black and red as well.
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by Kuma »

Image
Image

here is a picture at the car meet here in Killeen, Tx and my two alpine white VAG
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by Kuma »

here are the differences between the two grills.


I think i like the stock grill better.



Image
Image
ursmkd
Posts: 13
Joined: Sun Mar 03, 2013 12:23 pm
Location: RI

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by ursmkd »

Stock grille :thumbsup:
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by Kuma »

I figured out the seat situation. Stupid plugs were swapped around.
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by Kuma »

ursmkd wrote:Stock grille :thumbsup:

Yeah that's what I'm thinkIng too Paul.
User avatar
scubadave
Posts: 496
Joined: Fri Mar 01, 2013 9:12 pm
Location: Cottonwood Heights, Utah

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by scubadave »

You know if you want to dull down some of the chrome, you can take Steel wool to the surrounding trim and black it out like you will with the headlights. I left the rings chrome on mine. It looks better I think. That at least is an option untill another upgrade.
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by Kuma »

I might plasty dip the grill
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by Kuma »

And plasty dip my wheels silver cause they look like poop
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by DE80q »

I agree with the stock grill. I hate to even say it, but I would have gone with clear corners instead of the smoked. Doesn't quite look right on the white.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
ur20v
Posts: 228
Joined: Sun Mar 03, 2013 10:47 am
Location: NOVA

Re: 1990 CQ-SEAT SWAP! I NEED HELP! WONT RECLINE!?

Post by ur20v »

Maybe if you "joey mod" your headlights the smoked corners might look a little better
2005 A4 Ultrasport - K04'd, AEB head, GIAC tuned, still pokey
2001 TT 225 quattro Roadster - Stage 2+, looking for B&M shifter
2001 S4 - Tial 770R'd 3.1 stroker coming
1988 80 quattro - 4.2 powered FrankenAudi made from 13 cars and counting...
Post Reply