Nick's Black 90 - 3B Swap: Running!

[savagerocco]

I've got ecu as well only thing I can think of is injectors and I think I have those too.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

[Rallyfreak202]

I have an extra oil cooler. PM me and we can work something out.

[nsimps]

I have an extra oil cooler. PM me and we can work something out.

PM'd :-)

[nsimps]

Still getting parts and budget all sorted out. I feel like there's been some good progress and hopefully over the winter break I can figure out what the bottom end will end up being and find a workable wiring harness.

In the meantime, I created this google doc that will be used to track what parts are being used for future reference for people who may want to attempt the same thing. For those of you who have provided parts and want to be recognized there let me know and I can put in your mg username

More than likely there are missing parts in the spreadsheet. Let me know what those are so they can be added

https://docs.google.com/spreadsheet/ccc ... 1Z4M2xWTkE

[nsimps]

Got the ECU yesterday. Just need to find a test vehicle to make sure it's good.

On a different note, the 90 let out a massive white cloud the other day when taking off from the parts store. Literally created a wall of smoke. Got to the stop light and the smoke dissipated. Started off gently at the green light and within 100 yards no smoke.

Still need to do a compression test to see what's going on. I'm hoping for the best but this could mean an early tear down, which isn't good because both me and my wife are going to school and need two vehicles.

On the bright side, it could mean an early start on the swap!

Ill be sure to put up the results of the comp test.

[Mcstiff]

Hard right turn?

[nsimps]

I wish it were that simple

[Mcstiff]

That's too bad. I've fogged a good half block or so after a good right! Funny thing is a dude in a Camaro drove through it and looked at me like I just blew the engine; I was just laughing my ass off since I knew it was just the CCV flooding.

[nsimps]

Short update...I bought a motor A 3b with turbo, flywheel, clutch, wiring harness and ECU. It's on a truck somewhere between here and Massachusetts at the moment. While this may be the more expensive way to go, it will be better in the long run as it will allow for mild updates as my boost hunger grows. The current plan is to take a couple days off work between Spring and Summer semesters, get a group of helping hands, some good food and get it done over an extended weekend. At this point it looks like I'm still needing to address/acquire the following:

- Fuel lines
- oil lines
- Some kind of air filter
- MAF
- Downpipe
- Intercooler piping

I'm sure there are other things but can't think of them at the moment.

[Audilard]

3" downpipe ok? I have one that can be modified if you go that route.

[Audilard]

I have a bucket of fuel lines, hoses etc we can dig through as well.

[nsimps]

Darin that would be awesome! Let me know when that 80 is in the garage and I'll come up to check it out and sift through the piles

I was going to have Hank make me up a downpipe but if you have one and it doesn't take much modding...

[savagerocco]

You can come up to my shop and we can get it to fit....

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

[Audilard]

Sorry that I don't have that downpipe, but glad you can use the hoist and engine stand. Let's get this thing done!!

[nsimps]

Thanks Darin for loaning me two very important tools! The car looks absolutely amazing, can't wait for summer events!

[nsimps]

Motor was delivered today to a friend's work. He snapped a couple pics for me to drool over until this afternoon.

[Audilard]

I doubt you'll wait until April to swap this thing in! Clean it up good and make sure it's ready to go!

[Hybrid_Hatch]

sweet looks really complete!

[nsimps]

Looks like I have some accessories and downpipe for the most part. Ill get some more detailed pics later this evening

[Audilard]

You know I'll be harassing you all night if you don't post pictures this evening. What time does "evening" official start? Pay backs!!!

[nsimps]

Motor is in the garage! Lots to cleanup, bead blast, paint and reinstall but I'm super excited to get to work More pics to follow but to appease Darin:

[Audilard]

That looks like a lot of scrubbing! So maybe April afterall!

[Wheeljack]

That looks like a lot of scrubbing! So maybe April afterall!

lol, Darin!

I'd empty a can or two of PB Blaster on that lump...

[nsimps]

See? I wasn't lying I was hoping to leave most of the stuff on there to save on getting new gaskets, but it looks like I'll be taking it all off, cleaning, and reinstalling. It will be fun to do over the next couple months along with the wiring harness.

Speaking of which... ... going to need some help on that one

[Wheeljack]

No problem...here ya go: