Loxxrider's 200 20v Revver: See you on "The Project Pad"

[Hank]

Can you get a good shot of the Treadstone core up close?

[loxxrider]

Cool beans! Can you measure the width from the head mounting surface to the widest part of the compressor.

I'm not sure I follow...so you want me to measure from basically the flange on the manifold to where one would first contact the compressor housing? What for?

Can you get a good shot of the Treadstone core up close?

I have some earlier in the thread of the inside of the core and such. What do you want to see in particular?

[Mcstiff]

Cool beans! Can you measure the width from the head mounting surface to the widest part of the compressor.

I'm not sure I follow...so you want me to measure from basically the flange on the manifold to where one would first contact the compressor housing? What for?

So, I am looking for the width of the assembly; to see if it would fit in a B chassis

[loxxrider]

oh I see haha yeah, I'll measure it for you when I get home from work.

[my2000apb]

hey psa, if you want another haha or soemone else may want, this core is on closeout

$75!!!

http://cgi.ebay.com/ebaymotors/Treadsto ... 2eab40a564

[Mcstiff]

hey psa, if you want another haha or soemone else may want, this core is on closeout

$75!!!

http://cgi.ebay.com/ebaymotors/Treadsto ... 2eab40a564

Cheap for a person with a TIG and time.

[loxxrider]

helllllz naw, I need my 1492 CFM one

[loxxrider]

OK, it depends on which way you clock it of course. I doubt you'll be able to point the comp housing out to the side like I did in the last photo above. If you could do that though, the comp outlet flange is roughly 11 inches away from the head flange mounting surface.

If you rotate it such that the compressor outlet faces downwards (like in the middle picture), you end up with about 9.5 or 10 inches.

[loxxrider]

Well, I got home from work at ~5, went to the gym at 6:30, got back from the gym at 7:30, saw front railing of the big boat sticking straight up in the air, resurrected it, and now its time for bed at 10:50. What a nice, eventful day.

[Mcstiff]

OK, it depends on which way you clock it of course. I doubt you'll be able to point the comp housing out to the side like I did in the last photo above. If you could do that though, the comp outlet flange is roughly 11 inches away from the head flange mounting surface.
If you rotate it such that the compressor outlet faces downwards (like in the middle picture), you end up with about 9.5 or 10 inches.

Sweet. It looks like the angle keeps it a little higher as well.

[loxxrider]

Oh, I also forgot to add that with it clocked sideways you dont need the spacer flange, so you can subtract 3/8" off of that measurement

[Mcstiff]

Cool, good info for me to plot with.

[loxxrider]

I officially only need bolts now

Ordered my custom Holset flange sonnnnnnn

[85oceanic]

Wooot!!!!

[my2000apb]

wooooooooooooooot

so itll be liek the biig fat brother of danas car??! hahah

[loxxrider]

hahahaha yes exactly!

'cept my turbo is a little bigger

[loxxrider]

oh and if you want an update...this is something that I've never discussed or even really considered seriously before...but I'm 99% sure going to get me one of those fancy Hank manifolds :-o

[dubsmith]

Do it. You won't be disappointed!

[pitts]

those are so fancy he should sign each one with welding rod... "this is the manifold that hank built"

he truly is an artist when it comes to manifolds....

[85oceanic]

Yes do it!!! you will LOVE IT!!!!

[loxxrider]

ooooooooh the talks we are having right now are getting me way too excited. o-ringed vac ports...75mm throttle body...CNC stuff...mmmmmmmm

[loxxrider]

we need to discuss this for a second.

If I get the "base" manifold, it will cost $X. If I get the "baller" manifold option, it will cost $2X.

Baller one will flow a good bit more and comes with fuel rail and such, so that offsets cost a little.

Keep my end goals in mind. 6-800whp. I think the "base" option would get me there, but the serious one will get me there more easily.

Also, I'm going to have to be on the lookout for a 75mm cable TB to go with this thing (and to match my IC piping size and flow calculations for what I'll need).

So yeah...whaddya think?

I gotta do this, ID 1000's and clutch at some point soon. Clutch is going to get neglected until its needed unfortunately. This manifold is taking the spot of my ABZ in a 90 build right now. Not forever, but it'll have to wait for a while after this.

[nuugen]

http://www.americanmuscle.com/bbk-75mm-tb-9495gt.html

Something like that..You will have to fab up an adaptor plate of course..

[Hank]

http://cgi.ebay.com/ebaymotors/80mm-Uni ... 3353wt_992


I have used a couple of these on manifold builds, and the quality is pretty good. You can not beat 100$ shipped with the throttle body flange. Damn Chinese are figuring things out

[loxxrider]

hmm haha that might have to be what I do...what about TPS though?