Loxxrider's 200 20v Revver: See you on "The Project Pad"

[chaloux]

I really don't know, I'm not sure if the #s in their product names/models refers to MM or not, but here is the spec page anyway:

http://www.compturbo.com/products/index ... t=CT3-6465

Here's the build thread (slowly progressing... has been focusing on selling stuff lately since we're waiting for the order): http://motorgeek.com/viewtopic.php?t=38368

And a question: what did you do with the lines going into the turbo intake hose? Bypass valve goes somewhere else?

[loxxrider]

Yep, seen the thread. Can't wait to see more. Make sure you measure that thing when you get it

[chaloux]

Yes, we've heard CT is notorious for mistakes. Marc is receiving the turbo before it comes to us, so I'm assuming he'll double check that it's right as well. I'm sure he made himself very clear about what we wanted.

[loxxrider]

The only lines going to the inlet are for the n75, bpv, and oil catch thingy. Typically people just replace all of that stuff when they go with a turbo that serious. My N75 is still hooked up but referenced off of the intake manifold and just vents tot he air (which is fine), the catch can also vents to the air (crank breather), and the BPV is now a BOV which is on the intercooler piping (as you can see in my sig).

[amd is the best]

What is this quick spool valve you guys speak of?

[Mcstiff]

amd is the best wrote:[/quote]

What is this quick spool valve you guys speak of?[/quote]

Quick Spool Valve

[amd is the best]

amd is the best wrote:

What is this quick spool valve you guys speak of?[/quote]

Quick Spool Valve[/quote]

Looks like a ghetto rig cob job to me. Oh, and thanks for the wise-ass link. I had already googled it with the hits being a bunch of forums talking about these things with no actual info.

[Mcstiff]

amd is the best wrote:[/quote]

amd is the best wrote:

What is this quick spool valve you guys speak of?[/quote]

Quick Spool Valve[/quote]

Looks like a ghetto rig cob job to me. Oh, and thanks for the wise-ass link. I had already googled it with the hits being a bunch of forums talking about these things with no actual info.[/quote]

Happy to help. You could zero it in more... http://tinyurl.com/4grjkzx

[amd is the best]

amd is the best wrote:

amd is the best wrote:

What is this quick spool valve you guys speak of?[/quote]

Quick Spool Valve[/quote]

Looks like a ghetto rig cob job to me. Oh, and thanks for the wise-ass link. I had already googled it with the hits being a bunch of forums talking about these things with no actual info.[/quote]

Happy to help. You could zero it in more... http://tinyurl.com/4grjkzx

[/quote]

Lol, now that's pretty cool! Didn't know you could use google to search specific sites.

[Mcstiff]

You can designate a date range also via the search sidebar.

[amd is the best]

You can designate a date range also via the search sidebar.

Google ftw! Serious!

[loxxrider]

Ed, that is priceless...thank you

[loxxrider]

got a vid of spinnin' the tires


Link to video

[iedawkin]

nice

[waxcoupe]

not bad

[85oceanic]

Woot! that looks like fun

[loxxrider]

its great fun!

get yours done already so you can do it too

[jay54f100]

That is pretty big. Cool vid.

[JonathanL]

Gonna have to brace that thing big time, itd be a shame to muck up that pretty header.

But you already knew that, lookin good

[pkw]

is that tire spin at the 9-10 second mark or just the sound of the boost control solenoid?

[WOMBAT]

Open wastegate dump!

[loxxrider]

Tire spin at the 4-5 second mark, but definitely not at the 9-10. I'm sure it would break them loose around a turn in second, but not straight. You hear open wastegate when it gets loud. I was going to re-route it, but now it would be kinda silly to do that if I'm just going to do a whole new DP with the bigger turbo anyhow.

[85oceanic]

its great fun!

get yours done already so you can do it too

I'm workin on it. I'm going to go pick up my exhaust here later this month (all tig welded SS). Get more videos up already!

[mxnhid]

Just called Goldfarb today and had a call back from Brant. Great customer service, talked about my build goals and what i have vs what i could get. He was very helpfull and he will call back monday with his collected information on inventory and options. Dig it! thanks Chris!

[loxxrider]

Awesome, glad they could help you out