Loxxrider's 200 20v Revver: See you on "The Project Pad"

k2exoman · Post by **k2exoman** » Fri Aug 19, 2011 11:34 am

I'm glad they are handling that situation properly!

85oceanic · Post by **85oceanic** » Fri Aug 19, 2011 4:26 pm

:woowoo: :woowoo:

LT91audi100 · Post by **LT91audi100** » Fri Aug 19, 2011 5:30 pm

Finally the day has come..hah

loxxrider · Post by **loxxrider** » Mon Oct 10, 2011 10:57 am

Its been almost two months since I've updated this or even seen the old girl :(

Just waiting for some super snazzy parts to get here so I can go down south and put the finishing touches on her for start-up.

I'm using this as an excuse to update:

Thanks Austin for the v8 door sills

I think they will look very nice in place of the stock boring 200 20v stuff.

530i is doing very well after a new waterpump (preventative). Its ticking because of a stuck lifter now, but its not hurting anything. Still runs like a top. 55W 5000k HIDs are going in as soon as they get here along with some poly engine/trans mounts. The headlights are WORSE than my 200 and the motor mounts were ripped (like they were in the Audi).

Post by **EDIGREG** » Mon Oct 10, 2011 11:17 am

Nice, those are sweet

a-talk · Post by **a-talk** » Mon Oct 10, 2011 12:28 pm

Hmm, didn't know V8s got metal door sills - nice!

85oceanic · Post by **85oceanic** » Mon Oct 10, 2011 5:50 pm

Awesome x3!

loxxrider · Post by **loxxrider** » Tue Oct 11, 2011 6:33 pm

I finally got the hardened crank cogs lined up to be made. I need people to put money down to make an order. Pricing will be similar to what EFIexpress was selling them for previously and until strength and fatigue testing can be done on the gears, there will be a liability release involved. PM me for details!

Kuma · Post by **Kuma** » Tue Oct 11, 2011 6:46 pm

Chris, i just wanted to say..

I am one state away from you.

Im in Atlanta.

BUT, one of these days i will try to make it farther and come and visit you!

loxxrider · Post by **loxxrider** » Tue Oct 11, 2011 6:52 pm

DUDE...

I was just in Atlanta over the weekend! You need to let me know ahead of time next time.

Kuma · Post by **Kuma** » Wed Oct 12, 2011 6:53 pm

gah! I just got here on Sunday, im attending a wedding, but i leave on SUnday to head back to Texas. Sometime next year though, i will be down near florida where you live. I think. Ill ttyl about it.

loxxrider · Post by **loxxrider** » Sat Oct 29, 2011 8:08 pm

I'll be going home this week to get the ole' girl running again with these new goodies attached.

ChrisAudi80 · Post by **ChrisAudi80** » Sat Oct 29, 2011 8:18 pm

Bad ass looking DP, Chris. Like it.
Hope you get this beast running soon.

85oceanic · Post by **85oceanic** » Sat Oct 29, 2011 8:54 pm

Yum... yes. I approve. Looking great man!

jcarrick · Post by **jcarrick** » Sat Oct 29, 2011 9:22 pm

That's awesome man! Now I need to get a tube mani on mine

You should come out to Oregon some time and meet up man!

Kuma · Post by **Kuma** » Sat Oct 29, 2011 9:32 pm

loxxrider · Post by **loxxrider** » Sat Oct 29, 2011 10:16 pm

jcarrick wrote:That's awesome man! Now I need to get a tube mani on mine You should come out to Oregon some time and meet up man!

I'd love to do that sometime Jon. When life settles down (aka steady job and no school), it might become a lot more feasible.

BTW all credit goes to Hank for the pictures above of course.

Post by **Hank** » Sat Oct 29, 2011 10:37 pm

Here is one more of it completed. 4" is so much bigger in person.... I hope it fits!!

VasP · Post by **VasP** » Sun Oct 30, 2011 12:08 am

looks nice.
have you seen if it clears the subframe as well though?

when i had a 4inch made(then replaced cause it was not needed), it had to be slightly ovaled in order to clear the subframe and fit between that and the shield in the photo.

Post by **Hank** » Sun Oct 30, 2011 12:16 am

I will ship it unterminated like you see it here. Chris will make the bottom portion. Like you said, 4 inch is just about impossible go get.go.fit well without doing the fitment in the car. I am sure Chris will finish it up nicely.

85oceanic · Post by **85oceanic** » Sun Oct 30, 2011 7:45 am

ShavedQuattro wrote: 4" is so much bigger in person.... I hope it fits!!

Umm... That's what she said?

ChrisAudi80 · Post by **ChrisAudi80** » Sun Oct 30, 2011 8:12 am

extreme90path wrote:
ShavedQuattro wrote: 4" is so much bigger in person.... I hope it fits!!

Umm... That's what she said?

loxxrider · Post by **loxxrider** » Sun Oct 30, 2011 8:57 am

Yeah... not looking forward to trying to get that 4" to fit IN THE CAR. Its OK though... it might just have to come out the fender

Post by **Hank** » Sun Oct 30, 2011 9:14 am

I haven't seen a type 44 in a while but I think the subframe lends itself to a 4 more

gtn116 · Post by **gtn116** » Sun Oct 30, 2011 10:16 am

I'll go eyeball the hole in my 5k... I'm kinda taking a brake on it while I play with the V8 some...

Loxxrider's 200 20v Revver: See you on "The Project Pad"

Re: Loxxrider's 200 20v: YAY Bilstein :)

Re: Loxxrider's 200 20v: YAY Bilstein :)

Re: Loxxrider's 200 20v: YAY Bilstein :)

Re: Loxxrider's 200 20v: YAY Bilstein :)

Re: Loxxrider's 200 20v: YAY Bilstein :)

Re: Loxxrider's 200 20v: YAY Bilstein :)

Re: Loxxrider's 200 20v: YAY Bilstein :)

Re: Loxxrider's 200 20v: hardened cog gears...

Re: Loxxrider's 200 20v: hardened cog gears...

Re: Loxxrider's 200 20v: hardened cog gears...

Re: Loxxrider's 200 20v: hardened cog gears...

Re: Loxxrider's 200 20v: hardened cog gears...

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v:

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D

Re: Loxxrider's 200 20v: :D