Hanks URQ 2.6L Autopsy

Post by **Hank** » Fri Sep 26, 2008 1:26 pm

I dunno. Whatcha think Darin?

quattro87 · Post by **quattro87** » Fri Sep 26, 2008 3:07 pm

I think my wife is going also.....can i come and play too? Oh, I almost forgot I already wore out my tires last week and might get into trouble with the wife if I tried to bug out again this weekend plus I still think it is a recipe for trouble, but fun trouble. LOL

About that miss Hank...I hope you aren't going to blame my IIc, cause if you are just go ahead and bring it back. The only reason I let you use it is that I couldn't bear the thought of seeing Darin and Dave crying and thought I would try to save the last bit of credibility you still had with them. I knew that if you didn't bring the Ur home this time it would be all over but the teasing.

Post by **Hank** » Fri Sep 26, 2008 7:10 pm

Ok what do you guys think....

Okay, so they are in there, and they fit great. I used some textured plastic that actually matches the 5ktq texture pretty darn well. They are secured, and are ready to be hooked up. I will get to that in a second. What is great about the 4k/URQ dash is that the cluster is broken up into three sections, the tach, the dummy lights(with the boost and gas gauge) and the speedometer. The board is in that flexible plastic stuff, so I just peele that up made the 5ktq gauges fit, and then put them back over the top. All of the dummy lights work as does the light. I will backlight the gauges as soon as I get the two gauges to work.

So here is my problem, and I really need some help from you guys. I know some of you guys have played with these things. I am working out of an appartment with limited tools. I can only get it to work if I am helped a little bit.

OK, so the Tach has three wires. I should have maybe put a meter on the gauge cluster before I started to pull it apart, but I need to know what the three wires are for. Obviously the 034 IIc will drive one of the wires, but will the other two just be power and a ground? Any way to find that out without just trial and error. The interesting thing is that the later Dashes in the CQ have 4 wires for the tach. The backlight is independent of the tach....

Now on to the Speedometer. I am going to use the speed sensor out of hte 5ktq. I have not aquired one yet, but I think they are 3 wire sensors.
I am hoping that those wires come strait from the sensor and to the speedometer, but that cant be that easy.

Here are the three wires.

Really I appriciate any help on this.

Post by **Hank** » Sat Sep 27, 2008 10:30 am

Darin, Call me man. Lets meet up tonight!

Post by **Hank** » Sat Sep 27, 2008 2:56 pm

And we have a tach.. now for the speedo! I picked up some cool stuff from the junkyard today to finish out my dash swap! I love the later dashes!!!

quattro87 · Post by **quattro87** » Sat Sep 27, 2008 3:51 pm

What do you need a tach for? I just used to bounce it off of the rev limiter, figuring that you had set it conservatively at ~8K. It worked great for me and let me keep my eyes on the road more. :wink: :-D

Seriously thats cool you have a tach now. Trial and error?

Post by **Hank** » Sat Sep 27, 2008 6:30 pm

No error, just trial! I hope things go as well with the Speedo. I met up with Darin tonight and Scott my cousin is over there right now drooling. The funniest story happened. I had my URQ in the driveway of Darins house, and Daves clean CQ was out on the curb, and Darins beast was in the garage. All of a sudden a guy rolls up in a Cossi Mercedes 190 and we hear "sweet Coupe Quattro! " He stopped and looked at the cars, and was really enjoying it.

Dave · Post by **Dave** » Sun Sep 28, 2008 10:42 am

yeah... everyone had a good laugh at my "stock slow" cq... turbo soon i know... just have to convince the wife...

quattro87 · Post by **quattro87** » Sun Sep 28, 2008 10:45 am

Hybrid_Hatch wrote:yeah... everyone had a good laugh at my "stock slow" cq... turbo soon i know... just have to convince the wife...

Might be easier just getting used to slow.

pploco · Post by **pploco** » Sun Sep 28, 2008 3:02 pm

Hybrid_Hatch wrote:yeah... everyone had a good laugh at my "stock slow" cq... turbo soon i know... just have to convince the wife...

I feel your pain man!! I missed Hank by minutes, but got a chance to drool over Darin's Lago - man have I got the itch!!! Every time I see a fast audi, my poor cq gets slower and slower.

Dave · Post by **Dave** » Sun Sep 28, 2008 3:46 pm

you missed me by minutes then too...

Audilard · Post by **Audilard** » Sun Sep 28, 2008 4:48 pm

I'm glad we are getting a good group going in Utah. I hope we all can make it out to the Audi club event with our 20vts and kick some butt.

Post by **Hank** » Sun Sep 28, 2008 6:33 pm

You hear that Dave?

Dave · Post by **Dave** » Tue Sep 30, 2008 3:32 pm

haha... yeah... you guys got a spare "T" lying around???

quattro87 · Post by **quattro87** » Tue Sep 30, 2008 6:16 pm

K26 off of 5ktq that I would donate for the cause of the Utah Mayhem gang.

Derracuda · Post by **Derracuda** » Tue Sep 30, 2008 9:37 pm

now that's some good innovation Hank 8) looks good. i might have to take a page from this for the future. complete dash conversions are a PITA sandwich.

Post by **Hank** » Mon Oct 13, 2008 5:06 pm

Yeah Derek, I dont know how I missed your post, but it really worked out great. I need to post the backside of the gauge cluster to show how I made them fit in there. The tach is requires practically no cutting whatsoever. THe Speedo is kindof a pain.

Here is the finished product. I deleted the radio and added some gauges ( I have the Innovate DB wideband gauge, EGTs and Fuel pressure on that slot now..)

Derracuda · Post by **Derracuda** » Mon Oct 13, 2008 5:14 pm

yeah, i'm def. copying you on that move Hank.... my alpine 4kq is going to need a lengthy speedo, and i don't want to do another dash conversion. great job 8)

Post by **Hank** » Tue Dec 09, 2008 11:42 pm

Small update on the URQ.... I figure that this one needs to be updated before I move onto the S6 project.

Okay so I have been making some manifold lately. So I whipped up this manifold for my URQ.

I had some fuel rails made and they came out great. The best part is that I do not have to deal with the PITA bolts that the old ANN manifold required. It is super easy to get the thing on and off. I even threw in a Phenolic Spacer courtesy of 034MS. They also supplied an Rs2 Fan and shroud that is a nice fit... I am up here in Utah now, and right now, it is cold as hell.. ( 12 hours in the shop today at 11 degrees...) But I have my eyes on a Millers event in May and I am tired of running hot...

I think the Header brace is new since the last time I have updated as well. I developed a crack on the collector, and since this brace has gone on, no more cracks. YeeHaaa.. I am working on a valve cover as well that will try and baffle more of the oil before it goes into a catch can. I am so sick of oil everywhere..

I think that is about it. I got some 245-45-16s for this car so when spring rolls around, it can hit the road again!!! I got some low mile TT calipers and Pads to put on a8 rotors, and after pooping another stock Prop valve, I sprung for the Wilwood valve. It is going to be nice to have brakes behind this car...

Think that may be it for now.

Quattro v1.0 · Post by **Quattro v1.0** » Wed Dec 10, 2008 11:14 am

This almost makes me want a 20v... Oh wait, I got one! Should I start building it?

Audilard · Post by **Audilard** » Wed Dec 10, 2008 11:20 am

Looks great Hank! What size -AN lines are on the fuel rail?

BTW...you need to empty your phone's mailbox. I can never leave a message.

Oh and do you want to trade your 30R for my 3071R.... :-D

Post by **Hank** » Wed Dec 10, 2008 12:00 pm

I think the 20vt looks great in that car.

Darin, inlet is -6 and the outlet is -6. I am going to upgrade the fueling over the winter though and then i will put the -8 fitting and lines on.

If you find a 35r, maybe we can trade. I think my s6 needs a 3071r though...

Audilard · Post by **Audilard** » Wed Dec 10, 2008 12:13 pm

My anal all black AN order (say that fast 3 times) from Summit arrives today. I'll have a 45 and 90 -6 AN fitting that could make the routing of those lines a little better.

a_CQ · Post by **a_CQ** » Wed Dec 10, 2008 1:00 pm

Wow, Hank that looks great! Did you weld that yourself?

P.S. I have a spare 7A valve cover if you need it...

Post by **Hank** » Wed Dec 10, 2008 1:23 pm

Yes sir. I welded this manifold. It is welded both inside and out. It is a very strong piece. Hmm I might hit you up on that 7a cover.