Hanks URQ 2.6L Autopsy

Document and share your build!
mr_aj_johnson

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by mr_aj_johnson »

Bad Beer Rots Our Young Guts but Vodka Goes Well

It's a little more politically correct than that story about violet gives willingly
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

I would love to do more reporting but a leaking rear main seal may require a trans drop
Dave
Posts: 415
Joined: Wed Feb 27, 2013 11:46 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Dave »

ShavedQuattro wrote:I would love to do more reporting but a leaking rear main seal may require a trans drop



do you need a seal? i have a couple floating around.
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

I have a seal if you will replace it for me :). Scott owes me a built transmission so I hope he can get me one before the last race this year and I can make seal swap while i am in there...

Scott, you out there?
User avatar
Audilard
Posts: 1253
Joined: Wed Feb 27, 2013 3:00 pm
Location: Draper, UT

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Audilard »

So the race is on as to which Iroz drops their transmission first. I vote Hank. John?
Darin
1989 80 20vt
quattro87
Posts: 1000
Joined: Wed Feb 27, 2013 2:06 pm

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by quattro87 »

Ha ha........I dont have time for car stuff. Im on moving furniture around and painting in the process detail. Sound like fun? :(
nismo

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by nismo »

mr_aj_johnson wrote:Bad Beer Rots Our Young Guts but Vodka Goes Well

It's a little more politically correct than that story about violet gives willingly


I know Vi well! :) Never learned any other way.

Eric
TheArchitect

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by TheArchitect »

mr_aj_johnson wrote:Bad Beer Rots Our Young Guts but Vodka Goes Well

It's a little more politically correct than that story about violet gives willingly


Both of those are orders of magnitude more PC than the version I learned from an EX navy electronics teacher.
In today PC excesses, that teacher would have been fired...
User avatar
speeding-g60
Posts: 2152
Joined: Fri Mar 01, 2013 10:46 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by speeding-g60 »

Derek has E85 readily (within 30 miles) AVAILABLE.... AND IT MEASURED OUT TO 91% YESTERDAY ;)
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

I like ot posts because it let's me know who is lurking in my thread. Lol
User avatar
ringbearer
Posts: 1282
Joined: Wed Feb 27, 2013 12:50 pm
Location: Nor-Cal

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by ringbearer »

I think everyone is lurking in your thread. Hard not to.
User avatar
chaloux
Posts: 3167
Joined: Wed Feb 27, 2013 11:43 am
Location: Muskoka, Ontario, Canada

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by chaloux »

Lurk all day... hahaha. I am especially interested because STROKER.
Matt

18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

Image
(4x5)v=20v

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by (4x5)v=20v »

PRA4WX wrote:
loxxrider wrote::stupid: I'm trying to study for a circuits analysis test lol (should have taken that years ago)

:stupid: Studying a Beech 1900D electrical system to teach this week whilst simultaneously studying the fire system on the CRJ200-700 and i'm HERE for this very thread to scope out how the 2.6 is gonna act! :slap:


2nd that, nice project!

Good to see another aviator on here.
PRA4WX
Posts: 589
Joined: Sun Mar 03, 2013 2:10 pm

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by PRA4WX »

(4x5)v=20v wrote:
PRA4WX wrote:
loxxrider wrote::stupid: I'm trying to study for a circuits analysis test lol (should have taken that years ago)

:stupid: Studying a Beech 1900D electrical system to teach this week whilst simultaneously studying the fire system on the CRJ200-700 and i'm HERE for this very thread to scope out how the 2.6 is gonna act! :slap:


2nd that, nice project!

Good to see another aviator on here.

Same here! 8)
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

Something in the front of the transmission is not too please about 29 psi break in procedures... This are at 29 psi is far faster than before...
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

Didn't even get the shop dust off it yet.... Sounds like a chainsaw on power.... I've grown to know that is a bad sign...
(4x5)v=20v

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by (4x5)v=20v »

Ruh row.
User avatar
Mcstiff
Posts: 2003
Joined: Wed Feb 27, 2013 4:16 pm
Location: Erie, CO

Hanks 612whp URQ 2.6L break in... promising!

Post by Mcstiff »

:( I could not tell if that first post was good or bad.


Sent from my iPhone using Tapatalk
HeartlessNomad12

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by HeartlessNomad12 »

chainsaw sounds from a car are never good
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

It isn't a sound I have been accustomed to since going 01e. Since it isn't speed or gear related, I gotta think it is something to do with the pinion or input shaft. Sounds like a couple teeth were displaced with air....


The new trans is going to be wicked if I ever get it. High bias center, torsen 3:1 front diff, gardens and cryo shaft and gears along with the updated parts. Come on scotty! I am rooting on you! I think this engine and turbo have a legit chance at 600wtq. I need a nasty box to hold it!
scottmandu

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by scottmandu »

ShavedQuattro wrote:The new trans is going to be wicked if I ever get it. High bias center, torsen 3:1 front diff, gardens and cryo shaft and gears along with the updated parts. Come on scotty! I am rooting on you! I think this engine and turbo have a legit chance at 600wtq. I need a nasty box to hold it!


I'll have something substantial for you by the end of the week, my apologies for the lengthy build this trans has been a bitch and currently I'm down 3 people, with no time or patience to hire more....
quattro87
Posts: 1000
Joined: Wed Feb 27, 2013 2:06 pm

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by quattro87 »

Audilard wrote:So the race is on as to which Iroz drops their transmission first. I vote Hank. John?


Does this mean I have a few more days? 8) I'm pulling for you too, Scott......my RS2 01e 6spd is sitting on the shelf at Hank's shop. :o I'm getting worried! :lol:
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

Thanks Scott! You have always been helpful to me in the past.. I doubt this will be any different.

LOL@ you Dad. I would be VERY nervous. I would like to promise you that you would get your box back with everything in the box, but I have been known to chuck gears out of the case :)
Dave
Posts: 415
Joined: Wed Feb 27, 2013 11:46 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Dave »

yeah it might look like an rs2 trans on the outside...


Have you guys seen my awesome gear ratios?
Post Reply