Hanks URQ 2.6L Autopsy

Document and share your build!
HT Motorsport
Posts: 350
Joined: Wed Feb 27, 2013 11:56 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by HT Motorsport »

Torsen is fine until you lift a wheel as you know :P

I will be interested to see what you think of the torsen up front. I have heard that it can induce understeer and torque steer vs the open diff. Stasis on their race cars tried but stayed open in the end I believe.

Cooling the trans is a good Idea for road race use.
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

Yeah, it will be interesting Haydn. Where you planning on using the wavetrac in the front or rear of your projects? I would love to try one in the rear but 1300$ is a bit spendy for me. On other forums, they do group buys with 20 people to get the price down to 995$. I say we organize one!!!

I will give good feedback on it. I have a couple of spring track days planned and maybe a Miller day if I can get the trans in and to the dyno. I want to play around with some pickup points on the trailing arms and control arms to see if I can develop less lift and squat under acceleration and braking..
audifreakjim

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by audifreakjim »

ShavedQuattro wrote:Also Scott, with the torsen front and torsen center, should I be nervous about the extra heat that it will create? Perhaps I should look into cooling the trans..

Anybody think a triple torsen drivertrain is a bad idea? :)


Really, you really went there? Prepare for page 200 coming soon :o
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

LOL Jim, though I do not know what I am laughing at!
a_CQ

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by a_CQ »

Hard to believe you only ever did 8 passes...but ok, and how many broken parts did you endure in 2 miles? Drag racing was invented for muscle cars, because they couldn't turn.
User avatar
loxxrider
Posts: 6642
Joined: Wed Feb 27, 2013 7:46 am
Location: Jupiter, FL / Somewhere, PA

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by loxxrider »

I think there were plenty of broken parts from launching on the street too... and on the track while going 'round corners lol
-Chris

'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

I have never been at an open track day for the drag strip. I catch these lame "midnight" drags that allow for 3 passes on a crappy track on a good night. I have only ever been to 3 of them in my life!!! 8-9 passes is pretty accurate!!!

I have launched on the street a few hundred times though!!! It is pretty hard on axles and tranmissions for sure!! This narrow 5 speed I pulled apart last night was beat... poor thing
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

Image

Thanks Scott! Let's see what this engine can do with a built trans!
User avatar
ringbearer
Posts: 1282
Joined: Wed Feb 27, 2013 12:50 pm
Location: Nor-Cal

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by ringbearer »

Sweet!

Lets see how long it can handle the punishment.

Poor boxes have a hard life.
User avatar
loxxrider
Posts: 6642
Joined: Wed Feb 27, 2013 7:46 am
Location: Jupiter, FL / Somewhere, PA

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by loxxrider »

Yay! Now we are even!
-Chris

'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
User avatar
Mcstiff
Posts: 2003
Joined: Wed Feb 27, 2013 4:16 pm
Location: Erie, CO

Hanks 612whp URQ 2.6L break in... promising!

Post by Mcstiff »

I'm headed to western CO this weekend, I should swing up for a ride :D
audifreakjim

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by audifreakjim »

ShavedQuattro wrote:LOL Jim, though I do not know what I am laughing at!


The Torsen arguments of not one but three Torsen diffs. Glad to see you have a good trans,btw that would fit in an avant.
User avatar
speeding-g60
Posts: 2152
Joined: Fri Mar 01, 2013 10:46 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by speeding-g60 »

a_CQ wrote:Drag racing was invented for muscle cars, because they couldn't turn.



ummmmm.... maybe invented.... now adapted.

and a 1/4mile pass = >1 mile of driving :) the trans would see the same abuse on the street, especially by a terror like Hank.
bradyzq

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by bradyzq »

ShavedQuattro wrote:Image

Thanks Scott! Let's see what this engine can do TO a built trans!


Fixed it for ya.
a_CQ

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by a_CQ »

Is it done yet? Quit fvcking around and putting things on fire...

http://www.youtube.com/watch?v=YHG7X-d-hpw&hd=1
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

LOL. It was for a school presentation about microwaves!!!
nismo

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by nismo »

No excuses...you work NOW!

Eric :)
Quattro v1.0
Posts: 405
Joined: Wed Feb 27, 2013 11:08 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Quattro v1.0 »

ShavedQuattro wrote:LOL. It was for a school presentation about microwaves!!!


Tin foil is pretty cool, but try a plasticized foil bag from some potato chips WAYYyyyyyy better ;O}
Highlander

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Highlander »

quattro v1.0 wrote:[/quote]
ShavedQuattro wrote:LOL. It was for a school presentation about microwaves!!!


Tin foil is pretty cool, but try a plasticized foil bag from some potato chips WAYYyyyyyy better ;O}[/quote]

I'll take any pictures/updates at this point.

Cheers,

Craig
User avatar
speeding-g60
Posts: 2152
Joined: Fri Mar 01, 2013 10:46 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by speeding-g60 »

try raw eggs in the shell in water in the attempt to boil them (a buddy did this).

pressure builds and it was spectacular!
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

Well, I thought I had an HTA 3794r secured from a guy out east. Sent paypal, got tracking and then got the tracking number canceled and a full refund because he got a better offer on the way to the post office :(
oldsklaudidub

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by oldsklaudidub »

ShavedQuattro wrote:Well, I thought I had an HTA 3794r secured from a guy out east. Sent paypal, got tracking and then got the tracking number canceled and a full refund because he got a better offer on the way to the post office :(


Isnt that the turbo the Evo guys swear by?

I am sure you can get one for the right price on one of there forums.
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

Several Evo guys have touched 900whp with them on exotic fuels. The turbine is a little small, but they spool just 500rpm later than an hta3582r. It would have been a wicked turbo for my setup. My eyes are still peeled for one, but it is kindof a rare turbo. I may end up getting one new in the end.
oldsklaudidub

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by oldsklaudidub »

ShavedQuattro wrote:Several Evo guys have touched 900whp with them on exotic fuels. The turbine is a little small, but they spool just 500rpm later than an hta3582r. It would have been a wicked turbo for my setup. My eyes are still peeled for one, but it is kindof a rare turbo. I may end up getting one new in the end.


what is the difference in cheddar, new vs used?

would you port out the the exhaust side a little?
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Hanks 612whp URQ 2.6L break in... promising!

Post by Hank »

New Retail is 1900$ but used is hard to find for under 1500$. I had a deal at 1200$ but someone offered the guy 1500$ at the last minute. The Evo guys run them with .82 housings to get those 900whp figures. Several cars dipping into the 8s stripped out on that turbo.
Post Reply