Andy's 91' 80q

rennenmsports · Post by **rennenmsports** » Sun Jul 18, 2021 11:02 pm

My new air filter box mold. Making it out of high quality fiberglass. But I think everyone cuts them out. If your interested in one let me know

: C4EB263C-456A-45D1-9B48-57C7EE33ACA3.jpeg (129.59 KiB) Viewed 67512 times

PRY4SNO · Post by **PRY4SNO** » Mon Jul 19, 2021 8:11 pm

Oh boy, that's a nice tactic. Adapting the Sport quattro concept has been on my mind a long while.

Is there ducting into the scuttle panel / rain tray?

Velocity stack?

rennenmsports · Post by **rennenmsports** » Mon Jul 19, 2021 8:42 pm

Thanks bud! I made a plate with a 3 inch tube to cover the hole in the bottom of the battery tray. Then since I’m not running ac I attached a 3 inch silicone hose pushed through the firewall to draw air from inside the cabin. Found spectre 4 inch duct flanges. One on the inside for a 4 inch turbo gaurd air filter. There is a few slots going into the rain tray from factory making up for the 1 inch difference. There is room for a velocity stack as well.

rennenmsports · Post by **rennenmsports** » Mon Jul 19, 2021 8:47 pm

: 0B7F968E-B481-4583-9347-C93FA8C80FED.jpeg (115.92 KiB) Viewed 67482 times

: 5CC3DC9F-7303-42CC-B75B-810C86BD562C.jpeg (118.53 KiB) Viewed 67482 times

: 1401354B-B32B-46B4-806A-89FA2514A26E.jpeg (114.05 KiB) Viewed 67482 times

rennenmsports · Post by **rennenmsports** » Tue Aug 03, 2021 4:56 pm

: 4E0A2643-A498-4D38-9B04-9252DC3A8E81.jpeg (29.07 KiB) Viewed 67293 times

The mold is coming along nicely. I’m still debating on what to make the real one out of. A lot of heat will be generated under it.

PRY4SNO · Post by **PRY4SNO** » Sun Aug 22, 2021 8:14 pm

http://www.extremeheatprotection.com/hi ... satin.html

Something like this looks alright... I'd guess basically any fibreglass rated for high heat will do the job nicely. If you were so inclined you could use gold foil to reflect heat away from the airbox, and/or a thin OEM-like aluminum shield as well.

rennenmsports · Post by **rennenmsports** » Fri Sep 10, 2021 8:36 pm

That looks good! I’ll look into it further. I have a bunch of different things on the car pending. I’m running aluminum fuel line from the front midway up the firewall to under the back seat right now. Almost done. But need about 5 ptfe lined flexible hoses to finish the fuel system to hopefully be able to idle it on its own now. I’m getting there. Got everything mounted. Just need to plumb everything up

rennenmsports · Post by **rennenmsports** » Sun Oct 31, 2021 10:07 am

Finally got the plug made. I’m about to make the piece that actually goes onto the car. It’s going to have a boost logic universal 4” air filter

: 891D4F93-57C2-44B2-B081-6F62C4E9AE30.jpeg (112.42 KiB) Viewed 62026 times

: F164F827-6703-4BAA-8D0F-AC0D7EA36CD6.jpeg (92.3 KiB) Viewed 62026 times

rennenmsports · Post by **rennenmsports** » Mon Nov 01, 2021 2:28 pm

: E8307F2A-B9CA-4E6E-8E0D-1CD300FB928A.jpeg (50.12 KiB) Viewed 61972 times

rennenmsports · Post by **rennenmsports** » Mon Nov 01, 2021 6:04 pm

It fits

you can see the flange on the filter inside the first layer of glass

: 5ABD3683-D59B-4341-BB8A-BF092989C2B4.jpeg (107.68 KiB) Viewed 61968 times

: CB29EA43-A729-441F-B3DE-2688DCF65810.jpeg (180.67 KiB) Viewed 61968 times

rennenmsports · Post by **rennenmsports** » Thu Nov 04, 2021 7:39 pm

: 47A65F24-FB5D-423C-8349-E7E30B06597E.jpeg (160.46 KiB) Viewed 61808 times

: 44A728C2-577C-49F0-9442-7CC89E3BBCD2.jpeg (115.74 KiB) Viewed 61808 times

rennenmsports · Post by **rennenmsports** » Sat Nov 06, 2021 2:52 pm

Now that I know everything will work out. It’s on to the next one made out of something I found that can handle up to 1100 degrees F and make it thicker.

: 0D11BEAF-A267-4B1B-803D-BCB5D734BBBE.jpeg (130.15 KiB) Viewed 61739 times

I failed miserably using this. Gonna try something different

rennenmsports · Post by **rennenmsports** » Sat Dec 11, 2021 8:30 am

Well. She finally runs on her own after 17 years

I tried to post the video but it didn’t work. It would probably be sideways or upside down anyway

What a sigh of relief!

: 93420BF8-7D42-41B7-A857-AF7CF27E0DFB.jpeg (140.72 KiB) Viewed 60763 times

rennenmsports · Post by **rennenmsports** » Fri Dec 17, 2021 7:15 pm

Hahaha. It fit. No dash removal

: 20370AAE-35DF-4AF0-8F76-052E853C5677.jpeg (85.35 KiB) Viewed 60576 times

rennenmsports · Post by **rennenmsports** » Sat Mar 12, 2022 4:58 pm

: 3B64B4B1-8CBC-478D-94B6-EF012EF3BAAE.jpeg (83.02 KiB) Viewed 57970 times

: 3B64B4B1-8CBC-478D-94B6-EF012EF3BAAE.jpeg (83.02 KiB) Viewed 57970 times

rennenmsports · Post by **rennenmsports** » Tue Nov 15, 2022 9:13 am

: C62E4300-68FA-4C1D-A7C6-35CC86F39346.jpeg (130.85 KiB) Viewed 51801 times

: 5946A282-DE12-4524-9950-3DEDF0878EEF.jpeg (150.75 KiB) Viewed 51801 times

rennenmsports · Post by **rennenmsports** » Mon Dec 05, 2022 2:54 pm

: F03ABC8A-4E6E-425B-9065-F39B724742CA.jpeg (953.89 KiB) Viewed 51141 times

sayoda · Post by **sayoda** » Sat Dec 10, 2022 10:09 am

Looks like it's getting there!!

Sent from my E7110 using Tapatalk

rennenmsports · Post by **rennenmsports** » Tue Jan 17, 2023 7:23 pm

Slowly but surely

: 4DF3674E-F72B-4813-9A66-A54F711387E4.jpeg (146.26 KiB) Viewed 49573 times

JH87 · Post by **JH87** » Fri Jan 20, 2023 1:04 am

rennenmsports wrote:Slowly but surely
4DF3674E-F72B-4813-9A66-A54F711387E4.jpeg

Looks great!

What’s the part number for that timing belt?

Sent from my iPhone using Tapatalk

rennenmsports · Post by **rennenmsports** » Sun Jan 22, 2023 1:43 am

T137RB. But it’s for the AAN. Different tensioner setup then the 3B

JH87 · Post by **JH87** » Thu Jan 26, 2023 11:01 pm

rennenmsports wrote:T137RB. But it’s for the AAN. Different tensioner setup then the 3B

Gotcha… uses the spring tensioner instead of the water pump?

Sent from my iPhone using Tapatalk

rennenmsports · Post by **rennenmsports** » Sun Jan 29, 2023 5:34 pm

Yes. But no spring in mine

: DD524DEB-B71F-4A90-8A47-1D98738B3A5A.jpeg (118.22 KiB) Viewed 48807 times

rennenmsports · Post by **rennenmsports** » Sat Mar 04, 2023 7:52 pm

: 19F53220-4000-44F8-A272-F289017273B3.jpeg (143.49 KiB) Viewed 47532 times

To get the front urs hubs and bmw wheel bearing to fit the outer cv joint into the 80q’s rear knuckles

rennenmsports · Post by **rennenmsports** » Sat Mar 04, 2023 10:38 pm

: DB3FFF23-FE7F-4601-A617-2D7C3F1116B6.jpeg (127.96 KiB) Viewed 47524 times

Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q

Re: Andy's 91' 80q