Ben's Oceanic 4kqt - BBQ X readiness - The last year

loxxrider · Post by **loxxrider** » Fri Mar 14, 2014 6:37 pm

Don't forget to be careful about those injectors man. Consider double stacking orings at the least. Or just don't get into lots of boost. Just be careful till the new hats are done!

chaloux · Post by **chaloux** » Fri Mar 14, 2014 8:49 pm

Oh boy. :vids:

2nd on injectors. Just be careful.

85oceanic · Post by **85oceanic** » Fri Mar 14, 2014 8:54 pm

Thanks guys! I will be. Remember, I'm also running an EFIxpress fuel rail so they may fit a bit different than what other guys are experiencing. Either way, I'm stoked! I'd like to throw a big thank you out to Chris too. You rock man!

Teaser:

AngryTaco · Post by **AngryTaco** » Fri Mar 14, 2014 8:59 pm

Just throw more boost at it if you arent sure.

Audilard · Post by **Audilard** » Sat Mar 15, 2014 9:44 am

Is it running?

chaloux · Post by **chaloux** » Sat Mar 15, 2014 12:01 pm

:vids: :vids: :vids: :vids:

85oceanic · Post by **85oceanic** » Sat Mar 15, 2014 3:49 pm

Not yet, I only got started about an hour ago. Thus far I have the injectors and VC installed. Just gotta take care of the T-Belt now. Fingers seriously crossed that I didn't kill valves when the cam gear broke.

chaloux · Post by **chaloux** » Sat Mar 15, 2014 3:54 pm

I agree. I'll drink one for you if you killed valves. LOL

85oceanic · Post by **85oceanic** » Sat Mar 15, 2014 4:31 pm

IT LIVES!!!!!!!!

Ok, before videos happen I need to bleed the AWIC, reassemble and tidy up some wiring and fix a leaky coolant hose. DAMN I'm so happy right now!

vt10vt · Post by **vt10vt** » Sat Mar 15, 2014 5:43 pm

Congrats!! In for videos.

A20V200 · Post by **A20V200** » Sat Mar 15, 2014 7:32 pm

Good Job Ben...can't wait to see this thing up and running

UrSobsessed · Post by **UrSobsessed** » Sat Mar 15, 2014 8:21 pm

PRY4SNO · Post by **PRY4SNO** » Sat Mar 15, 2014 8:59 pm

So... vids?

85oceanic · Post by **85oceanic** » Sat Mar 15, 2014 11:44 pm

HAHA I know, I know. I do have one vid the G/F took, but it's not uploaded yet. I just spent the last few hours trying to get a 1/2 decent working tune with no to little success thus far. I just need to take a break tonight and tackle it more later on. I will say this though, I am EXTREMELY happy to have this thing running again.

chaloux · Post by **chaloux** » Sun Mar 16, 2014 4:28 pm

Buddy, I'm dying here. I need 20vt4kq redline boost turbo spool action video.

I couldn't even start my car this morning because I didn't have the laptop to reset req_fuel.

What's going on with the tune? I'd be happy to look at a log

85oceanic · Post by **85oceanic** » Mon Mar 17, 2014 10:09 am

chaloux wrote:Buddy, I'm dying here. I need 20vt4kq redline boost turbo spool action video.

I couldn't even start my car this morning because I didn't have the laptop to reset req_fuel.

What's going on with the tune? I'd be happy to look at a log

LOL I have to do the exact same thing to mine right now. LOL My Req_fuel is 26 but it only will start if I have it set to 34. Grrr. Also, It keeps trying to lean way out. So, I'm going to try and scale up Marc's tune that he did for me on the 630cc injectors.

chaloux · Post by **chaloux** » Mon Mar 17, 2014 5:35 pm

26!? 34?! dude... your req fuel should be like 2.3 or something. That's why it's leaning out so hard. What, you got 50cc injectors in there? lol

2200 cc engine / 5 injectors / 1275 (?)cc injectors X 6.49 and then take 75% of that. Taken from here.

85oceanic · Post by **85oceanic** » Mon Mar 17, 2014 7:18 pm

LOL. Forgot my decimal point. 2.6 is what mine is at.

(2226/5/1135) * 6.49 = 2.54 so about 2.6.

EDIT: Pulled from the VEMS help section:

"REQ_Fuel = (D/N/I) * 6.49

Why are you taking only about 75% of that value?

chaloux · Post by **chaloux** » Mon Mar 17, 2014 7:20 pm

Okay phew. That's much different, lol. Is your cranking enrichment off or something and that's why it's not starting?

85oceanic · Post by **85oceanic** » Mon Mar 17, 2014 7:23 pm

chaloux wrote:Okay phew. That's much different, lol. Is your cranking enrichment off or something and that's why it's not starting?

Ya, I just ran out of time to update everything. So, hopefully I will get some time after work this week to hammer the bugs out.

chaloux · Post by **chaloux** » Mon Mar 17, 2014 8:01 pm

85oceanic wrote:LOL. Forgot my decimal point. 2.6 is what mine is at.

(2226/5/1135) * 6.49 = 2.54 so about 2.6.

EDIT: Pulled from the VEMS help section:

"REQ_Fuel = (D/N/I) * 6.49

Why are you taking only about 75% of that value?

Just saw your edit.

Marc suggests 75% to allow a more fine tuning of the VE table

Audilard · Post by **Audilard** » Mon Mar 17, 2014 9:41 pm

I should send you my 1200cc gas tune config that Hank did. Should get you going just fine.

loxxrider · Post by **loxxrider** » Mon Mar 17, 2014 10:31 pm

I also have a tune that I wrote for those exact injectors. It'd be a decent starting point at least.

mushasho · Post by **mushasho** » Tue Mar 18, 2014 6:39 am

I had to start from scratch on mine, but it's pretty robust as it stands right now... I'm willing to help as well...

Sent from my HTC One using Tapatalk

85oceanic · Post by **85oceanic** » Tue Mar 18, 2014 9:56 am

You guy's are awesome! PMs Sent

Ben's Oceanic 4kqt - BBQ X readiness - The last year

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.

Re: Ben's Oceanic PTE5857 AAN 4kq - It lived and then died.