An Alpine URQ in Utah - Knee deep in Swarf

[Hank]

Super jealous of hte machine Chris. I am already getting cramped style on 20" of x.

[Wheeljack]

Super jealous of hte machine Chris. I am already getting cramped style on 20" of x.

Preachin' to the choir, Hank.

And I lament that Sean...I AM just messin' around up here!

[85oceanic]

Man, it's threads like this that make my build feel like poop. Awesome stuff man! Keep the updates coming!

[Audilard]

Dang Chris! I need to come by and check things out! What ya gonna make first!?

[PRA4WX]

Wow! My hat is off to you, sir. Awesome!

[OOOOGT]

I know who I'm calling to do machine work in the future, nice rig!

[nsimps]

Man, it's threads like this that make my build feel like poop.

:stupid:



My jaw dropped(literally) when I saw the CNC cabinet. Thanks for the update Chris!

[chaloux]

Dude holy effing epic update! That is so awesome. What'd it cost to have the grooves done? You can PM me if you want...

[quattro87]

Very nice Chris! I really love your old mill, but this is hard not to get excited about. I may have to make a special trip to Salt Lake just to check it out. Can it make Lancia parts? :wink:

[scubadave]

Jeeze, nice hardware :jerk: Your GF said you were busy with some new shenanagans.

Im going to have my head off in the near future, wanna throw it on the flow bench? See if im good at porting or just full of myself?

[Highlander]

Mega impressive Chris.

This is more interesting than the car stuff!!!!

I'm getting totally hooked on this kind of thing.

Keep the updates coming.


Cheers,

Craig

[ringbearer]

Very nice, looking good on all fronts!

[EDIGREG]

[Audilard]

I've already contacted Chris for his first project.

[dbldmnd]

Pure awesomeness, the fab capabilities are impressive. Open for tours? I'll be in PC in a few weeks for the freestyle junior nationals with a side trip to Alta and the fish taco stand. Shooting for Wed the 6 for the trip up LCC.

[Wheeljack]

Sure. Anyone is welcome to stop by. Not much to tour at the moment, especially in the winter as I'm mostly shut down out there due to the weather. But I can still shoot the bull with the best of 'em while kicking back some 75th anniversary Alta ales and scarfing down a fish taco or two.

[a_CQ]

Nice. Very nice.

One thing I noticed looking back at your caliper/rotor pictures...I would recommend you shave those caliper pins down some. While clearance is there when stationary your rotor will flex enough to hit the pin and leave a nice mark on the rotor ring. BTDT...and had to shave for about 2mm clearance on each side. Shit, pretty soon you can make your own calipers.

[Marc]

Sure. Anyone is welcome to stop by. Not much to tour at the moment, especially in the winter as I'm mostly shut down out there due to the weather. But I can still shoot the bull with the best of 'em while kicking back some 75th anniversary Alta ales and scarfing down a fish taco or two.

Buys $20k used cnc and runs it only part of the year due to no heat in the building.

[Quattro v1.0]

Sure. Anyone is welcome to stop by. Not much to tour at the moment, especially in the winter as I'm mostly shut down out there due to the weather. But I can still shoot the bull with the best of 'em while kicking back some 75th anniversary Alta ales and scarfing down a fish taco or two.

Buys $20k used cnc and runs it only part of the year due to no heat in the building.

Probably not that he can't heat it, but rather because it would cost about $900 / month TO heat it

[Wheeljack]

quattro v1.0 wrote:[/quote]

Sure. Anyone is welcome to stop by. Not much to tour at the moment, especially in the winter as I'm mostly shut down out there due to the weather. But I can still shoot the bull with the best of 'em while kicking back some 75th anniversary Alta ales and scarfing down a fish taco or two.

Buys $20k used cnc and runs it only part of the year due to no heat in the building.

Probably not that he can't heat it, but rather because it would cost about $900 / month TO heat it[/quote]

[Wheeljack]

Yeah, Petar. I will trim the pins. It's on the list. Between flex and thermal expansion, its a little close for comfort.

And Marc, it does seem a bit silly, but in reality, I will have heat out there for next winter and it won't really be up and running this winter anyway. So this machine, once installed, will be able to run year 'round.

Good thing I do remodeling too.

[Audilard]

Sure. Anyone is welcome to stop by. Not much to tour at the moment, especially in the winter as I'm mostly shut down out there due to the weather. But I can still shoot the bull with the best of 'em while kicking back some 75th anniversary Alta ales and scarfing down a fish taco or two.

and listening to 90.9 KRCL Public Radio!!!

[Wheeljack]

and listening to 90.9 KRCL Public Radio!!!

Darin, you're welcome to come over anytime and meditate for world peace.

[Hank]

lol, I miss my Utah friends....

[Wheeljack]

lol, I miss my Utah friends....

Hank, I'm just a phone call away...Your direct access line is 1-900-CNC-HELP