Re: AMD's 91 200q Project
Posted: Thu May 05, 2011 8:49 am
A few shots a friend got as I was leaving a local event:
The Project Pad
Nick's 1991 200q Project - QUAT44RO
Page 13 of 82
Re: AMD's 91 200q Project
Posted: Thu May 05, 2011 8:53 am
nice launch
Re: AMD's 91 200q Project
Posted: Thu May 05, 2011 8:57 am
Wasn't even a launch, just rolled on it in first. Launch there would have been some marks and tire smoke 
Re: AMD's 91 200q Project
Posted: Tue May 10, 2011 4:25 pm
Re: AMD's 91 200q Project
Posted: Tue May 10, 2011 4:33 pm
awesome
can't wait for Carlisle!
can't wait for Carlisle!
Re: AMD's 91 200q Project
Posted: Tue May 10, 2011 4:35 pm
Also, update. I replaced the radiator and finally got a good one. My cooling fan has been acting funny and really drew a lot of current to the point where the car would almost stall when it kicked on. When I was changing the radiator I noticed that it was physically hard to spin manually. I looked up a new cooling fan and yeah right, $480 from German Auto Parts. So I got a 10" slim fan and I'll see how that works. I'm sure it much less CFM but there's room for another if need be.
Re: AMD's 91 200q Project
Posted: Tue May 10, 2011 4:37 pm
loxxrider wrote:awesome
can't wait for Carlisle!
Hell yeah man! Me either!
Re: AMD's 91 200q Project
Posted: Tue May 10, 2011 5:51 pm
Got. Damn.
Re: AMD's 91 200q Project
Posted: Tue May 10, 2011 5:59 pm
amd is the best wrote:[/quote]
Also, update. I replaced the radiator and finally got a good one. My cooling fan has been acting funny and really drew a lot of current to the point where the car would almost stall when it kicked on. When I was changing the radiator I noticed that it was physically hard to spin manually. I looked up a new cooling fan and yeah right, $480 from German Auto Parts. So I got a 10" slim fan and I'll see how that works. I'm sure it much less CFM but there's room for another if need be.[/quote]
I think I am starting to have a similar problem with my S6. The clutch fan is a bit wobbly, too.
Is it possible to change both fans to generic slim fit electric fans and have them run off two different thermo switches?
135 for the clutch and 380 for the aux is just too much right now. Is it possible to open up the aux fan motor and rebuild it or something?
I think I am starting to have a similar problem with my S6. The clutch fan is a bit wobbly, too.
Is it possible to change both fans to generic slim fit electric fans and have them run off two different thermo switches?
135 for the clutch and 380 for the aux is just too much right now. Is it possible to open up the aux fan motor and rebuild it or something?
Re: AMD's 91 200q Project
Posted: Tue May 10, 2011 6:32 pm
ChrisAudi80 wrote:Is it possible to change both fans to generic slim fit electric fans and have them run off two different thermo switches?
I have done this on VW's with satisfactory results. I don't know how the S6 fans are set up, but usually the thermoswitches are two-stage, with separate terminals for different temperatures. Very convinient!
Re: AMD's 91 200q Project
Posted: Wed May 11, 2011 7:39 am
MADE IN 1991 MOTHERF***ER!!
hahaha that's running STRONG!
hahaha that's running STRONG!
Re: AMD's 91 200q Project
Posted: Wed May 11, 2011 7:44 am
WOMBAT wrote:MADE IN 1991 MOTHERF***ER!!
hahaha that's running STRONG!
WOW, I'd not get to see the vid until now. Cool!
I just love the way this exhaust sounds. Almost V8ish...
And I posted some lame ass shit about my fans before.
Re: AMD's 91 200q Project
Posted: Wed May 11, 2011 4:25 pm
Haha! Thanks guys! I laugh literally every time I watch the video.
Re: AMD's 91 200q Project
Posted: Wed May 11, 2011 4:49 pm
You'd giggle if you were a passenger, too. 
:cheers:
:cheers:Re: AMD's 91 200q Project
Posted: Thu May 12, 2011 6:56 pm
Updated the VEMS firmware to 1.1.91 today and it seems as though it may have helped the trigger error/misfire issue slightly but it's still not gone.
Re: AMD's 91 200q Project
Posted: Thu May 12, 2011 7:07 pm
I need mudflaps too.
Re: AMD's 91 200q Project
Posted: Thu May 12, 2011 7:37 pm
ShavedQuattro wrote:I need mudflaps too.
Everyone NEEDS mudflaps!
Re: AMD's 91 200q Project
Posted: Mon May 16, 2011 10:31 pm
Changed the transmission fluid with OEM Audi G005000 gear oil. $21.75 per liter!!! It was funny because the dealer pulled them out and they were covered in dust, lol. I'd like to get the rear diff fluid changed as well but I can't seem to spot the fill hole, granted I didn't look all that hard. Looks like some things will have to be removed to access the fill hole.
Re: AMD's 91 200q Project
Posted: Mon May 16, 2011 10:39 pm
From what I can tell, you need to remove the passenger rear wheel, and you can see the fill plug through there. I still have yet to do mine. I've had the fluid ready to go in for the past 5 months. too much work...
Re: AMD's 91 200q Project
Posted: Tue May 17, 2011 4:40 am
pilihp2 wrote:From what I can tell, you need to remove the passenger rear wheel, and you can see the fill plug through there. I still have yet to do mine. I've had the fluid ready to go in for the past 5 months. too much work...
Yep, and you need some tubing to go from the bottle to the fill plug
Re: AMD's 91 200q Project
Posted: Tue May 17, 2011 6:46 pm
I've got a neat little pump that fits on gear oil bottles with a hose attached to pump it in. I'll have to get on this.
Re: AMD's 91 200q Project
Posted: Wed May 18, 2011 2:00 pm
Nice vid! That thing really scoots!
Re: AMD's 91 200q Project
Posted: Wed May 18, 2011 5:42 pm
I really like the fact that you are constantly beating the absolute piss out of it.
This car is awesome.
This car is awesome.
AMD's 91 200q Project
Posted: Thu May 19, 2011 8:39 am
I have been detailing the shit out of the car for the last 14 hours or so. Should look real nice for Carlisle!
A few pics:
Before:
After:
Before:
After:
A few pics:
Before:
After:
Before:
After:
Re: AMD's 91 200q Project
Posted: Thu May 19, 2011 8:56 am
Wow, looks great!