The Project Pad

Posted: **Mon Aug 31, 2009 8:32 am**

Ah thats good to hear. Thank you Marc. I'll have everything out today and shipped tomorrow (have class all day today) as long as i can get the address in that time.

If its possible, I'd like to have a new launch control/shift cut chip put in because it got burned out on that ECU for some reason...I'll be in touch about that.

Posted: **Mon Aug 31, 2009 3:15 pm**

ECU and wiring harness out of the car and ready to ship first thing tomorrow.

Posted: **Mon Aug 31, 2009 3:47 pm**

Kevin has given me a serious amount of grief on the vortex with "bad talking".

Not so much the expert now.

Posted: **Mon Aug 31, 2009 3:53 pm**

TheArchitect wrote:Kevin has given me a serious amount of grief on the vortex with "bad talking".

Not so much the expert now.

:? :tard:

Posted: **Mon Aug 31, 2009 4:00 pm**

You guys are free to voice your opinions in here, I really don't mind at all.

I'd just like to say that I appreciate Kevin seeing this through to completion. I know it hasn't exactly been a walk in the park for him either. Its partly because the VEMS people freakin suck at correspondence and some of their releases on firmware, etc. just don't make sense. Why release something to the public that isn't stable. Most of their help is done through a wiki page for Christ's sake.

Anyway, carry on! I am especially thankful for your help Marc...apparently we couldn't do it without you haha. 8) :thumbsup:

:cheers: :heart:

Posted: **Wed Sep 02, 2009 11:48 am**

so0o0ooo sad that its raining out and I don't have enough power to spin my tires and kick the ass end out on the wet roads right now :(

USPS needs to hurry the ef up and get that ECU there and back!

Posted: **Wed Sep 02, 2009 11:54 am**

newt wrote:
my2000apb wrote:
TheArchitect wrote:Kevin has given me a serious amount of grief on the vortex with "bad talking".

Not so much the expert now.
:? :tard:

Kevin likes to openly bash other standalone systems, and claim most to be inferior to what he offers. Particularly 034 systems, he claims we're a bunch of folks 'slapping stickers' on boxes and calling it ours. I think Jarrid just finds it curious that Kevin can't figure out his 'own' system, and has to farm out the help. We do our best to stay neutral and keep the s-slinging to a minimum, but this situation definitely caused a little chuckling here after all he's said....

Yeah Nate, I don't get it and to think how nice they were to you guys at waterfest a few year back. It just must be you guys are a serious threat to his sales.

Posted: **Wed Sep 02, 2009 2:33 pm**

did a p-shop

dear lord i need lowness this year

Posted: **Wed Sep 02, 2009 2:36 pm**

yeah man that looks so dope all low like that. doooo it :-)

Posted: **Wed Sep 02, 2009 5:29 pm**

friend doing doughnuts while my car sat watching, longing to show it up with some flat spins.

http://www.youtube.com/user/justrackl#p ... 4xVjxGakfA

Posted: **Wed Sep 02, 2009 7:35 pm**

Damn dude your ride looks sick in that pic!!

Posted: **Wed Sep 02, 2009 7:47 pm**

thanks man, ya I really hope I can get it to go that low on coils...

Posted: **Wed Sep 02, 2009 8:28 pm**

Going with different rims?

Posted: **Wed Sep 02, 2009 8:39 pm**

I'm actually really liking these wheels. They aren't the end all be all for me though.

I want a set of beater track/rally wheels (maybe some porsche twists or something)

and then maybe a set of BBS RS's later on for a nice, light, good-looking daily setup.

All I know is that I loooove the subtle poke and the look of the meat in the rear of this thing. Coils are in my mind 24/7 haha. I'll be happy for a little while with the coils and VEMS tuned to wring the stock turbo out for all its worth

Posted: **Wed Sep 02, 2009 8:40 pm**

Mine had to be pretty damn close to as low as that one

Posted: **Fri Sep 04, 2009 7:57 am**

Soo I think I am going to try and make my own custom sticker for my car (for when it's worthy)...

its going to be based on this picture

and the saying/theme will be along the lines of

as kinda an inside joke. Even on stock suspension when I get too many friends in my car it will rub, so I might do a custom version with t44 in mind

(I dont mean for that to be offensive to anyone...its just a lighthearted joke)

Anyway, maybe I'll make another along these lines

(aka low and wide or down n out)

Posted: **Sat Sep 05, 2009 4:46 am**

Car looks dope in that pic!!!

You definetly need to drop it, oh wait so do i :wtf:

Posted: **Mon Sep 07, 2009 1:51 pm**

ok i did a sloppy draft of what I want

I think its going to look pretty nice

less sloppy draft coming soon

Posted: **Mon Sep 07, 2009 5:16 pm**

chop

Attachment ( 18390 ) : image.jpg

Posted: **Mon Sep 07, 2009 5:29 pm**

I cant stop staring at that straight on pic from the back!!! Looks AMAZING with the WIDE tires

Posted: **Mon Sep 07, 2009 5:33 pm**

get Belgarion to do it up for you... he has some mad skillz in that department.

Posted: **Mon Sep 07, 2009 6:16 pm**

dont worry i got this on LOCK!

I have seen what Belg did though. If I didn't already do it I would have contacted him for sure. Will post up in a bit.

and thanks derrish...I cant get enough of it either. It looks so good. Now I just need it to be that low in reality and we will be good to go!

OH, one thing I forgot to mention...if Marc can get the ECU back to me fast enough I'm going to try to tune it next friday and then on saturday go to the USP dyno day BBQ thing and dyno it. (chris green's shop home of the 9-sec VRT S4, etc.)

Posted: **Mon Sep 07, 2009 7:05 pm**

how 'bout this???

(not finished yet but close)

Posted: **Tue Sep 08, 2009 7:17 am**

give it some rings

Posted: **Tue Sep 08, 2009 7:29 am**

Yep will do along with an exhaust

The Project Pad

Loxxrider's 200 20v Revver: See you on "The Project Pad"